Remington 40x Serial Number Lookup

• Remington 40x Serial Number Lookup Numbers
• Remington 40x Serial Number Lookup Number
• Remington 40x 22lr History
• Remington 40x Serial Number Lookup By Name
• Remington 40x 22lr Serial Numbers
• Remington 40x Serial Number Lookup

Remington answered many of these criticisms by utilizing its short-action 40X receiver, a target-grade action manufactured with very tight tolerances developed in 1955. As the Remington XP-100. Serial Numbers on Remington Firearms. If you are looking for more information about your particular Remington firearms, then the serial number can give you some useful insight into the date of manufacture of your specific gun. In the picture below, you will see an example from a newer Remington 597 rifle with a manufacturing date of April 2006.

Below, the pre-production, or prototype, Model 37 with fore-end barrel-band

image by courtesy of Dave Kern

The early production rifles, between 1937 and 1939, had the barrel band deleted,

and the fore-end wood finished at the point where the band would have been.

The post 1939 production models had the fore-end extended to the length of the rifle in the images below.

Once civilian rifle shooting again became popular after the 1939-45 European War,

not until the Pacific War ended were manufacturers able to consider restarting

the production of civilian target rifles.

It was really not until after 1947 before such rifles became available in either the Unites States or Great Britain.

Remington self-advertised their small-bore target rifles in their own paper 'Rifle News' early in 1949.

The similarity between the three rifles in the advertisement is marked,

and has occasionally led to some confusion when the rifles have been spoken of by the uninitiated.

The 'Rangemaster' is the Model 37, the 'Matchmaster' is the Model 513T, and the 521T was then un-named.

At that time, Remington wrote of these rifles, under the article heading

'REMINGTON RIFLES STAND OUT AS INDOOR SHOOTING ACTIVITIES BOOM'

'Veterans & Tyros praise Match performance of Remington models'

'Bridgeport, Connecticut, February 1949'

With one of the biggest indoor occasions ever recorded in full tilt,

the word is that Remington match rifles are prominent as ever on the firing lines.

Their consistent high scoring performance is drawing plenty of enthusiastic praise'

Model 37

A fine precision instument. Every part, every feature is planned to bring the utmost in hair-line accuracy. The 'Miracle Trigger' is a favourite with shooters because of its smooth, sharp, crisp, lightning-fast let-off with no creep or backlash. Its single sighting plane lets you put your cheek against the same identical spot on the stock, no matter what type of sight you use.

Model 513T

A smooth handling, superb;y accurate rifle. This moderately priced model offers the shooter a heavy match barrel, target stock, micrometer sights, and the comfortable adjustable front sling swivel.

Model 521T

A sharp-shooting combination for target or field shooting. Popular priced, extremely easy to handle. The right rifle for the right start, ideally suited to the young rifleman. Self-cocking bolt and double locking lugs provide correct head-spacing. It has a corrugated trigger. And the separate sear provides smooth, crisp pull.

One hesitates to criticise such a successful company's advertising, particularly seventy years on,

but many of the points raised neither differentiate well between the three rifles,

nor bring up what potential purchasers may have seen as the most relevant features.

Some may even consider there to have been an overly obvious element of the blowing of Remington's own trumpet,

but opinions and outlook change with the times.

Below, the later production model 37, famously known as the 'Rangemaster'.

Gta 5 ppsspp iso download. This particular rifle has been fitted with Parker-Hale target sights,

the rear-sight being specifically made, with its own mounting block,

to fit rifles imported and retailed by that company.

Further down the page we show the standard rifle with its Remington fore-sight and Redfield rear-sight.

The next four images can be rotated and zoomed, either as initially loaded or full-screen for higher definition.

And the rifle fitted with the then popular Unertl telescopic sight.

...........

Initially introduced in 1937, and advertised post-WW2 in the Parker-Hale catalogue.

And again advertised in a U.S. journal in 1947

The rifle's model is clearly marked just forward of the rear telescope mounting block.

And the calibre on the left-hand-side just forward of the barrel's reinforce

on which the serial number is stamped.

The latter can be used to identify the date of manufacture,

and details for this are to be found online with a simple search.

Further forward, the barrel is stamped with the company address,

'REMINGTON ARMS CO. INC. ILION N.Y. MADE IN U.S.A.'

'PATENT NUMBERS 2.005.866--2.007.019--2.126.350'

beneath which lies the company's name logo and

'REG. US. PAT OFF'

The various inspection and proof marks are on the opposite side to the calibre stamping,

and, in common with rifles brought into the U.K., it carries the requisite stamp

' NOT ENGLISH MAKE'

which has been heavily bounced in the striking.

The closed bolt is also clearly proof marked.

The chamber is shown at the front of the receiver,

with the loading platform in place.

The bolt-head is just visible in the bolt-way at the rear of the receiver,

and the grooved component at the rear of the magazine-way shows the small hole

into which a small rod or the head of a punch must be introduced

and pressed down whilst the trigger is pulled

in order that the bolt may be withdrawn.

The base of the loading platform insert is flush with the front of the trigger-guard fitting,

as is the press-button for magazine release.

Left below: the unusual fitting under the front of the fore-end is a tell-tale sign

that this rifle was once fitted with an electric bedding system.

Details of a contemporary rifle still so configured can be found

on the page for the BSA Model 15 and Centurion rifles.

Right: the trigger adjustment screw.

....

Left: the Parker-Hale rear-sight mounting block,

and the safety catch set to 'ON'.

Right: the sear in the bolt-way with the bolt removed.

...........

Left, the Parker-Hale tunnel fore-sight, and

right: the specifically made Parker-Hale rear-sight.

.............

The bolt from below and above

.

The bolt-head face, showing the extractor and ejection levers.

The steel single-loading platform insert that can be interchanged

with Remington's 5-round magazine if so desired.

The spring-poaded ramp at the front of the platform helps guide a round into the chamber,

and is pushed down by the bolt-head on final closing of the bolt.

........

The original purchaser of this rifle had experienced some problems,

and returned it to the National Small-bore Rifle Association,

from whose retail facility it had been bought, for inspection.

The letter-head notes that the N.S.R.A. was formerly the

Society of Miniature Rifle Clubs, which had been renamed

just over ten years earlier post WW2.

...........

The rifle was returned, with no fault discovered,

Remington 40x Serial Number Lookup Numbers

and with the test groups shown below to confirm its capability.

The circumstances under which these were shot are explained in the accompanying letter above left.

The owner had obviously then written in reply stating his satisfaction,

as indicated by the N.S.R.A.'s relieved reply on the right,

also making the point that the rifle had , presumably in 1958,

been purchased from the Association second-hand.

The rifle was resold soon after, as the new owner, who had moved with it to Washington D.C.,

had evidently written to the U.S. National Rifle Association

with a query regarding the disassembly of the bolt.

This is unsurprising, as there was then no internet, and

nowadays there are many searches made enquiring how the bolt should be removed,

let alone how it can be taken apart!

It is one of very few small-bore target rifles for which

a tool is required to simply remove the bolt!

The Model 37 Rangemaster was updated to the 40-X - shown here - in 1963 .....

....... and still available in the U.K. post 1965 - as the 40 XB

Below are 1963 prices for comparison with other rifles of the day.

The 40 XB was included in a 1965 write-up of contemporary .22RF target rifles in Guns Review magazine,

along with the BSA Martini International, Winchester 52, Anschutz and Walther equivalents of the day.

View this flip-page facsimile

Return to:TOP of PAGE

See this website'sRaison d'être

And the rifle fitted with the then popular Unertl telescopic sight.

...........

Initially introduced in 1937, and advertised post-WW2 in the Parker-Hale catalogue.

And again advertised in a U.S. journal in 1947

The rifle's model is clearly marked just forward of the rear telescope mounting block.

And the calibre on the left-hand-side just forward of the barrel's reinforce

on which the serial number is stamped.

The latter can be used to identify the date of manufacture,

and details for this are to be found online with a simple search.

Further forward, the barrel is stamped with the company address,

'REMINGTON ARMS CO. INC. ILION N.Y. MADE IN U.S.A.'

'PATENT NUMBERS 2.005.866--2.007.019--2.126.350'

beneath which lies the company's name logo and

'REG. US. PAT OFF'

The various inspection and proof marks are on the opposite side to the calibre stamping,

and, in common with rifles brought into the U.K., it carries the requisite stamp

' NOT ENGLISH MAKE'

which has been heavily bounced in the striking.

The closed bolt is also clearly proof marked.

The chamber is shown at the front of the receiver,

with the loading platform in place.

The bolt-head is just visible in the bolt-way at the rear of the receiver,

and the grooved component at the rear of the magazine-way shows the small hole

into which a small rod or the head of a punch must be introduced

and pressed down whilst the trigger is pulled

in order that the bolt may be withdrawn.

The base of the loading platform insert is flush with the front of the trigger-guard fitting,

as is the press-button for magazine release.

Left below: the unusual fitting under the front of the fore-end is a tell-tale sign

that this rifle was once fitted with an electric bedding system.

Details of a contemporary rifle still so configured can be found

on the page for the BSA Model 15 and Centurion rifles.

Right: the trigger adjustment screw.

....

Left: the Parker-Hale rear-sight mounting block,

and the safety catch set to 'ON'.

Right: the sear in the bolt-way with the bolt removed.

...........

Left, the Parker-Hale tunnel fore-sight, and

right: the specifically made Parker-Hale rear-sight.

.............

The bolt from below and above

.

The bolt-head face, showing the extractor and ejection levers.

The steel single-loading platform insert that can be interchanged

with Remington's 5-round magazine if so desired.

The spring-poaded ramp at the front of the platform helps guide a round into the chamber,

and is pushed down by the bolt-head on final closing of the bolt.

........

The original purchaser of this rifle had experienced some problems,

and returned it to the National Small-bore Rifle Association,

from whose retail facility it had been bought, for inspection.

The letter-head notes that the N.S.R.A. was formerly the

Society of Miniature Rifle Clubs, which had been renamed

just over ten years earlier post WW2.

...........

The rifle was returned, with no fault discovered,

Remington 40x Serial Number Lookup Numbers

and with the test groups shown below to confirm its capability.

The circumstances under which these were shot are explained in the accompanying letter above left.

The owner had obviously then written in reply stating his satisfaction,

as indicated by the N.S.R.A.'s relieved reply on the right,

also making the point that the rifle had , presumably in 1958,

been purchased from the Association second-hand.

The rifle was resold soon after, as the new owner, who had moved with it to Washington D.C.,

had evidently written to the U.S. National Rifle Association

with a query regarding the disassembly of the bolt.

This is unsurprising, as there was then no internet, and

nowadays there are many searches made enquiring how the bolt should be removed,

let alone how it can be taken apart!

It is one of very few small-bore target rifles for which

a tool is required to simply remove the bolt!

The Model 37 Rangemaster was updated to the 40-X - shown here - in 1963 .....

....... and still available in the U.K. post 1965 - as the 40 XB

Below are 1963 prices for comparison with other rifles of the day.

The 40 XB was included in a 1965 write-up of contemporary .22RF target rifles in Guns Review magazine,

along with the BSA Martini International, Winchester 52, Anschutz and Walther equivalents of the day.

View this flip-page facsimile

Return to:TOP of PAGE

See this website'sRaison d'être

The Remington Model 513 Matchmaster is a bolt-action rifle, manufactured from 1940 to 1968. Since the rifle was designed for target shooting, it came equipped with a sturdy half stock with sling swivels, a beavertail fore end, and a straight comb which rose at the heel. Matchmaster barrels were a 27' heavy target semi-floating type. The patented Matchmaster trigger mechanism had an adjustable stop. The Matchmaster was made to fire only the .22-caliber Long Rifle cartridge from a detachable magazine. Civilian versions of the Matchmaster have a blued finish, while those made for U.S. Army and ROTC service can have either a blued or a parkerized finish.

A letter code was stamped on the left side of the barrel, just forward of the receiver. Usually the two middle letters indicate the month and year in which the rifle was manufactured. The first and/or fourth characters are inspectors' stamps. The serial number of the rifle was stamped on the underside of the barrel, just forward of the stock.

Remington 40x Serial Number Lookup Number

Variants[edit]

Remington 40x 22lr History

Model 513T rifles came equipped with Redfield aperture sights, 27-inch heavy barrel, target stock made of American Walnut, six-shot magazine and 1.25-inch sling swivels. The 'T' suffix indicates that the rifle was the target model, originally equipped with target sights.

The 'S' variant is medium-weight sporter rifle. Model 513TS or 513S rifles were sporter models equipped with regular sporting-style sights. The 'S' had a non-target-type barrel, a ramp or post front sight, and lacked the rear receiver mounting block for a rear aperture sight. The Model 513TX was set up for a scope and came with no sights.

History[edit]

There was a contract from the government to Remington for 10,000 .22 target rifles in 1940. During World War II, 513T rifle were used by the Army for training purposes. This included issue to DCM affiliated clubs for training juniors, and to ROTC units. Those rifles that were purchased by the Army were stamped 'U.S. PROPERTY' on the barrel and the receiver.

Remington 40x Serial Number Lookup By Name

According to the Remington website, approximately 137,302 Model 513s were manufactured. Today Remington 513T Matchmasters are still being used in smallbore competitions and are worth from $200 to $700, depending on their condition.

Remington 40x 22lr Serial Numbers

References[edit]

Remington 40x Serial Number Lookup